> Amin, yes you are right. The housing should NEVER get any
> water inside and if you have water it means you will have
> trouble either with circut shortening or something similar.
> You should also check the relay and make sure that is
> functioning properly. But most likely is the housing since
> you said it was wet. I would recomend buying a new housing
> from your local dealer. hope that helps
>
> cheers
Thanks a lot for the suggestion. I think i'm gonna try using some sort of sealant around the edges of the housing to see if that works. Cause i just bought the scooter and don't want to have to dish out more money. The housing that has the signal actually looks like it doesn't fit together as well as the housing on the right hand side, i'm guessing its a manufacturing defect cause i made sure that its not something stuck in the way.
|
Categories
NH Scooter Forum
