 |
Categories
NH Scooter Forum
Derbi Scooters
Fabricating some chambers, need a little help.
|
Author:
Skwirl (GP1 owner/rider)
|
Time:
08.27.2005 18:20
|
Text:
Good day! I hope someone can help me here.
I'm a machinist/fabricator for an aircraft machine shop in Arizona. I am in the process of building an expansion pipe for
my GP1.
Here's my problem....I don't have a pipe to measure from to make my own. I cannot find the dimensions of a good performance pipe anywhere, much less actually see one up close I could measure myself.
If someone can get me the measurements of a good race pipe, (Vinci, MK, etc) I would gladly help them out and either make them one for their own scoot, or something else they might possibly need. I can make pretty much anything in my shop, so if you have or know of one you can measure, or better yet, know of one in phoenix I could look at, please let me know at my email address. jack@canyonrider.com.
I would need the following to make this work out perfectly:
total length of pipe,
diameter and length of every section (weld to weld)
diameter and length of inlet and outlet sections:(not including silencer)
Last, but certainly not least, a digi picture would be great.
(Of course, an Autocad drawing of the pipe would be perfect as well!, hehe)
If you know of someone who can help me out here, Like I said before, I would either make them one for themselves, or something else they might need made for their trouble helping me.
Thanks a million guys, have a great day!.
Jack
|
Message threads
| Topic: |
Author: |
Time: |
|
|
|
Skwirl (GP1 owner/rider)
|
08.27.2005 18:20
|
|
|
|
