How to De-restrict a Derbi Atlantis or GP1

Unless you are good mechanic, I would avoid getting any scooters that are not made by major manufacturers. Even though the scooter may look good and have a nice price tag, it will be harder to find parts and mechanics that can work on it. For this reason, it usually much wiser to go with an established brand. It will end up being cheaper in the long run and give you more piece of mind.

Best,
Kyle Park
http://www.motorized-scooters.net

has anyone heard of a Generic Cracker 50 scooter?
its Korean as far as i know and i can't seem to figure out how to derestrict it, i think it may be electronically limited but i'm not sure. the performance is shocking. Accelerating away from a standstill is like watching paint dry. can anyone help me?

hi i was wondring if anyone knew how fast a derbi predator(LC) will go when it is standerd, and if anyone knew how fast u can make them go without too much hard work.
If anyone dose know plz E-mail me thanx

jodi

i took off my exhaust and found that there was no restriction on it but it did have the fork in the pipe and the crimp... so i guess i gotta take care of that.

my main question is if i have to take the ring out of the engine aswell... if anyone can email me some help i'd appreciate it.

I just bought a 2004 Derbi GP1. It had 5km on it and is new. I looked at the directions for the exhaust modification but the pipe thats mentioned in the article doesn't exist on my bike, hence nothing to cut off and crimp. Is there a slightly different process to deristrict this year? rev /cdi limiter . washer in the exhaust? Im going to have a look at the variator tomorrow to see if teh spacer exists as well. Any help or instructions would be appreciated.
thx
M

hi,ive got a derbi extreme 50cc and it only went 50 wen i 1st got it i replaced the exaust with a yasuni 75 (£199) and it now goes 77mph its so worth gettin a new exaust if uve got a crosser!!

> hi,ive got a derbi extreme 50cc and it only went 50 wen i
> 1st got it i replaced the exaust with a yasuni 75 (£199)
> and it now goes 77mph its so worth gettin a new exaust if
> uve got a crosser!!

ite do u rekan it would work for my derbi drd ?

How do I derestrict my Kymco ZX50

hi, ive got a derbi predator lc and sofar ive took the air box fully of and put a k& n air filter on it, and changed the main jet from 66 to 85, and a performance pipe aswell, and new rollers, im gettin round about 55mph, any ideas to get it go faster??

i just purchased a (2006 50cc Diamo retro) and I am wondering what restrictions I need to remove to get some power?

hi ive got a derbi gp1 on and 04 plate ive had new Tecnigas exhaust fitted and new carb and removed the spacer and had a kevla belt fitted and few other things. does any1 no if there r any more de restrictions i can have done?


thnks if any1 can help
haz

i am wondering how to de-restrict my peugeot trekker 50 anyone with answers email me or post back thanks:D

hi im new and need to know what speed i will get out of my derbi gp1 if i follow the process on this article and install an aftermarket exhaust such as a technigas or similar?

I dont know y u lot all moan about the Derbi predator if you want more speed out of it do what ive done get a sports exhaust and racing clutch roller i have and mine goes 58mph now just cost a bit of money

can neone plz help.... is there nething special that needs to be taken off my DNA tht i cud do myself as the shops tht ive asked in say they wont derestrict it becuz of insurance claims made against them.

i havent seen any sites with even a mention of a DNA50 can u plz help ?

thanks

scootersw r shit an ur all fucking wankers

> scootersw r shit an ur all fucking wankers
>


suck ya mom ya priikkk

> scooters r shit an ur all fucking wankers
>

Hi there, does any one know how to derestrict a peugeot speedfight 50. if any ones does please reply as i am diying to know how to. or if anyone knows a website to help me then please send it my way. it would be very grateful. thankyou Luke Newbegin

ur a gay boy or if your a girl u r a lesbo

i have a derbi sm 50cc and i have got nearly 50mph out of it but i am still running it in,does this mean it is restricted and if it is how do i de restrict it.

i have a AY 50 with a 70cc big bore kit. does any one know how fast they go with a race pipe??

>
> i have a AY 50 with a 70cc big bore kit. does any one know
> how fast they go with a race pipe??
as soon as you know i would be greatfull i you could tell me.
thanks

This is to anyone who is intrested in inproving the speed of a honda sky.

i have found that the front pullies from a Yamaha Areox fit on the honda also with a bit of welding involved, it will inprove the top speed of the scooter to 50mph but the pick up will not be as good but it is worth it. Also the cluch spring in them as standard is too stiff, i would suggest to put a softer cluch spring in to also inprove the top speed.

I have Derbi vamos and it goes only 40km/h does anyone know cheap way to make it go faster.

can eny one tell me how to de restrict an nrg power on a 55 plate or even just where they r ???

Any info on derestricting a Peugot Elyseo 50cc would be gratefully recieved

i have come across a 'peugeot speedfight 2' 100cc, i would like it if someone out there could tell me a few things about the bike before i buy it. its very cheap and would like to now quite soon please as it will get sold easily!!!! thanks
Andy

My suzuki already speeds at 41 mph, but i would like to goa little faster say bout 50-55 mph, is there any sports exhausts out there that would make the bike this fast? if there are give me the make of them please!!!!!!! and would i need to buy clutch rollers aswell, some of my mates said i would need to.........? thanks for the help.
or e-mail me at: savill_16@hotmail.com

>
> My suzuki already speeds at 41 mph, but i would like to goa
> little faster say bout 50-55 mph, is there any sports
> exhausts out there that would make the bike this fast? if
> there are give me the make of them please!!!!!!! and would
> i need to buy clutch rollers aswell, some of my mates said
> i would need to.........? thanks for the help.
> or e-mail me at: savill_16@hotmail.com
>
No you wont need a new clutch rollers. any race pipe for the AY 50 should make quite a big difference. A cheaper way to do it is to cut the baffers out of it.

hey can any 1 help me does any 1 no how 2 deristrict a tgb 303r iv taken the ring out but wat else can i do

> yes i can help!!!!!! look in the yellow pages and find a garage that fixes bikes, it will b much easier, trust my my dads already tried to deristrict a scooter and needed garage help!!! ok
> hey can any 1 help me does any 1 no how 2 deristrict a tgb
> 303r iv taken the ring out but wat else can i do

> > yes i can help!!!!!! look in the yellow pages and find a
> garage that fixes bikes, it will b much easier, trust my my
> dads already tried to deristrict a scooter and needed garage
> help!!! ok
> > hey can any 1 help me does any 1 no how 2 deristrict a
> tgb
> > 303r iv taken the ring out but wat else can i do
> bin reading article on tgb 303r and dont even know what a ring is.somebody help how can i get my 303 to do more than 31mph????????????

I RECENTLY RAN MY 2003 DERBI OUT OF GAS AND SINCE THEN I FILLED IT UP AND NOW ITACTS LIKE ITS TRYING TO START BUT IT WILL NOT START. ITS NOT TURNING OVER. BEFORE, IT STARTED UP FOR A SECOND THEN FADED AND DIED. I TRIED KICK STARTING IT AND FOR SOME REASON IT WAS REALLY HARD TO EVEN KICK START IT.

PLEASE HELP!!!

THANKYOU

HELP!!
i have just bought a derbi predator w reg 2000 and its playing up on me, the problem is, is when its cold and been left outside for a couple ov hours. What happens is it struggles to start and just turns a few times and drains the battery? I bought a new battery and charged it fully and put it on and it did exactly the same. but when the bikes been heated up in my shed it starts fine? could any one PLEASE help me i think its the starter motor might be sticking or sumet and thats whats draining the battery. please help!

does any one know how to de restrict a honda scv lead if so email me, or does any one have any tips on how to make it go faster it does 55mph now but want to go faster.

kirk1987@hotmail.com

how do i derestrict my zx50

I have an Aprillia Rally and this scooter can't noway to speed pass 28mph. I guess someone out there knows how to de-restrict it and your response is very much appreciated.

Does anyone know how to de-restrict the Vento GT5? thanks for your help